Skip to main content

← All posts

Build Log

Godwit Comes to the Raspberry Pi 5

· 3 min read

Godwit now runs on a regular Raspberry Pi 5, the little computer you can find almost anywhere, and it picked up a bigger 10.1 inch touchscreen along the way. Episode four is the whole build, start to finish, from a bare board to a working head unit on the bench.

Why a regular Pi 5

The first three episodes ran Godwit on a Radxa Dragon Q6A. The Raspberry Pi 5 is the small computer far more people already own, or can pick up off a store shelf, and it has a huge community behind it. This is the plain board, too, not the compute module version that needs another board underneath it.

Everything from the earlier episodes came along: the offline maps, search and directions, climate on the dials, and the rest of what you have seen so far. If you missed episode three, it is a good place to catch up.

What goes into it

  • A 10.1 inch touchscreen. More room for the map, and the climate screen has never looked better.
  • Two dials you can feel click as they turn. Volume, map zoom and both climate zones. They change jobs as you move between screens.
  • A board that stacks on top and does two jobs. It connects to the rig's wiring and to the vehicle's, and it runs the whole head unit from two wires off a battery.
  • A small USB sound card, because the Pi 5 has no headphone jack. It handles the speakers and the microphone for Hey Peregrine.
  • A storage drive with room for the maps and search of all of North America.

Waveshare sent most of these parts for the build.

The two spots where builds get stuck

Most of the build is plugging things in and turning a few screws. Two moments are where people get stuck, and the video catches both.

The first is a thin ribbon cable that leaves the screen completely black if it is off by a hair. Looking straight down, it can seem fine. Halfway through the build, one camera angle gives it away, and the video shows you exactly what to look for.

The second is the dials. Plug one in and it may tell you it is the wrong side. The fix takes two seconds and no tools, and the reason it works is a fun little surprise.

What comes next

The parts for the next step are already on the bench: a GPS receiver that updates 25 times a second, and a motion sensor that feels every launch and every corner. Together they unlock three screens you get a peek at in the video: a track map, a drag strip and a 0 to 60 timer. After that, Godwit starts learning to listen to the vehicle itself.

Godwit is demonstration and test software. It runs on the bench and is still under development. Do not install it in a vehicle you drive. The board that powers this build is not made for a vehicle's electrical system on its own either, and the video explains why.

Build one on your bench

The Godwit source is free and MIT licensed, like the rest of TrailCurrent. The Raspberry Pi 5 guide covers the wiring and how to put the software on the drive. Want to try it first? The Godwit page lets you drive it in your browser.

The parts in the video:

The Waveshare links carry our affiliate tag, and the sound card link is an Amazon affiliate link. As an Amazon Associate we earn from qualifying purchases. Either way it costs you nothing extra and sends a small cut back to the project.

New episodes go up on the open source channel. Would you build yours on a Pi 5? Tell us in the video comments.